Three Point Locking

Possible on primary swing panel only.

180 degree turn of handle moves locking rods and horizontal bolt. Uses 7 mm spindle.

With a profile cylinder, a panel is operable from the inside and the outside with handles on both sides.

(Also possible on an inward opening pair of folding panels, but without 3rd point.)

Two Point Locking

Standard between each pair of bi-fold panels and an option for swing panels.

180 degree turn of handle moves locking rods up or down. Uses 7 mm spindle.

Operable from inside only.

With Multi Point Locking with Latch, Deadbolt and Top/Bottom Locking Rods

Solid brass lever handles and escutcheon plates.

With Two Point Locking

Flat handles are available in Dark Brown, Silver Gray (not shown), White or Dark Gray.

Use Of Handles and Escutcheon Plates From Other Suppliers

See handle and locking options for dimensions of the standard hardware supplied.

Although availability may be restrictive and limited, other compatible handles and escutcheon plates can be used in place of the handles and escutcheon plates provided with the units. If other escutcheon plates are planned to be used, Nana Wall Systems must be notified when placing an order.

With Three Point Locking

In place of standard handles that operate the three point locking system, only European specification window handle that can clear the thumbturn which protrudes 1 1/2" (38 mm) from the surface of the panel, with a 7 mm (9/32") spindle, and with a rosette base of less than 1 1/4" (32 mm) can be used.

With Two Point Locking

Inward Opening Units:
In place of standard handles that operate the two point locking, any European specification window handle with a 7 mm (9/32”) spindle can be used, provided that the rosette base is less than 1 1/4" (32 mm). Note, however, that the folding stack may not be as flat a stack as with NanaWall^® standard handles.

Outward Opening Units:
In place of standard handles that operate the two point locking, only a European specification window handle with a protrusion of less than 3/4” (19 mm), with a 7 mm (9/32”) spindle, and with a rosette base of less than 1 1/4" (32 mm) can be used.

For more information on compatible hardware, contact the following companies.

Company	Address	Phone	Fax
Hoppe North America, Inc.	205 East Blackhawk Drive Fort Atkinson, WI 53538	(920) 563-2626	(920) 563-4408
Bouvet	540 DeHaro Street San Francisco, CA 94107	(415) 864-0273	(415) 864-2068
FSB	55 Ferris Street Brooklyn, NY 11231	(718) 625-1900	(718) 625-1930
Hewi, Inc.	2851 Old Tree Drive Lancaster, PA 17603	(717) 293-1313	(717) 293-3270
Omnia Industries, Inc.	P.O. Box 330 Cedar Grove, NJ 07009	(800) 310-7960	(973) 239-5960
Rocky Mountain Hardware	1030 Airport Way P.O. Box 4108 Hailey, ID 83333	(888) 788-2013	(208)788-2577
Valli & Valli(U.S.A.) Inc.	150 E. 58th, 4th FL New York, NY 10155	(877) 326-2565	(212) 326-8816

Please note that most of the catalogs of the above companies do not show matching window handles. As these handles are not common usage here, they are not stocked in the U.S.. However, as most lever handles do have matching window handles available in Europe, matching handles can usually be specially ordered.